Universal KNX Actuator System

Switch  |  Shutter/Blind  |  Heating  |  Dimming  | 0-10V  |  LEDs  | Logic

Universal KNX Actuator System

The Universal KNX Actuator System is a fully modular actuator system where extension modules can be plugged-in to extend the number of channels as needed. Up to 72 channels can be combined for switching, shutter or blind, heating, dimming, analog 0-10V or LED drivers with various size and power. Moreover, the system has advanced logic features included.

KNX Switch Actuator Advantages 2

Modular & Extensible

The Universal KNX Actuator System is a fully modular actuator system where extension modules can be plugged-in to extend the number of output channels as needed. Up to 72 channels and more than 10 types of extensions can be used with  various size and power.

Extension modules can be plugged-in next to the master module to add extra channels or functions to fit exactly to the project needs.

Modular
Rich features

Rich Features

With a feature-rich application, each channel can be individually configured to control :

  • Lights and sockets
  • Shutters or Blinds
  • Integrated temperature controllers
  • Automatic lighting or pulses
  • Heating valves
  • 0-10V analog devices
  • LEDs and LED strips (White, Tunable white, RGB, RGBW)
  • External contactors or valves
  • Advanced Logic functions including weekly calendar, sequences, math, logic gates and triggers.

Fast connections

Optional bridging bars allow to limit wired connections, greatly facilitating the installation work. In addition, each channel of the 16A extensions is equipped with double connection terminals to facilitate bridging and control of multiple loads.

Fast connections
Easy startup

Easy startup

Each module is equipped with signaling LEDs. The controls (4 pushbuttons) on the front panel of the master device permit switching the relays on and off by hand in parallel with the KNX bus, even without bus voltage or in a non-programmed state. This feature permits fast checking of connected loads for proper functioning.        

1 download !

This modularity makes it possible to build a complete actuator system and to configure it via the unique ETS application. Only one quick download is needed to configure all modules.      

1download
support

Training & Support

Elausys offers free introductory sessions on its products and a continuous support to the integrators.  

Brochure & Video

Brochure and video presentation showing the advantages offered by the universal KNX Actuator system.  

System Components

MSA-810

KNX Master Actuator 8x10A

MSA-810 is the master module of the KNX universal actuator system.

The master switch actuator is driving the complete system with up to 72 channels using extension modules. The master actuator already includes 8 channels 10A. It allows to configure switching, shutter or blind function on any of the channels. Advanced logic functions are included.

SAE-2410

 Switching Extension 24x10A

Switching extension 24 channels 10A / 230VAC

It allows to configure switching, shutter or blind function on any of the 24 channels. This extension module is used together with the KNX master module MSA-810. 

SAE-1210

 Switching Extension 12x10A

Switching extension 12 channels 10A / 230VAC

It allows to configure switching, shutter or blind function on any of the 12 channels. Each channel is rated at 10A. This extension module is used together with the KNX master module MSA-810. 

SAE-816

Switching Extension 8x16A

Switching extension 8 channels 16A / 230VAC

It allows to configure switching, shutter or blind function on any of the 8 channels. Each channel is rated at 16A and has two screw terminals to facilitate the connection of multiple wires. Very low consumption is achieved thanks to the use of bistable relays. This extension module is used together with the KNX master module MSA-810. 

SAE-810

Switching Extension 8x10A

Switching extension 8 channels 10A / 230VAC

It allows to configure switching, shutter or blind function on any of the 8 channels. Each channel is rated at 10A. This extension module is used together with the KNX master module MSA-810. 

SAE-416

Switching Extension 4x16A

Switching extension 4 channels 16A / 230VAC

It allows to configure switching, shutter or blind function on any of the 4 channels. Each channel is rated at 16A and has two screw terminals to facilitate the connection of multiple wires. Very low consumption is achieved thanks to the use of bistable relays. This extension module is used together with the KNX master module MSA-810. 

SAE-410

 Switching Extension 4x10A

Switching extension 4 channels 10A / 230VAC

It allows to configure switching, shutter or blind function on any of the 4 channels. Each channel is rated at 10A. This extension module is used together with the KNX master module MSA-810. 

HAE-805

Heating Extension

Heating extension 8 channels 24/230VAC

It allows to configure valve control functions on any of the 8 channels. This module has 8 integrated temperature controllers: each channel can be used as ON/OFF, PWM, or temperature controller. This extension module is used together with the KNX master module MSA-810. 

DOE-825-website

Digital Outputs Extension

Digital Outputs Extension 8 channels 0,25A / 12-30VDC

It allows to configure switching, shutter or blind or temperature controller function on any of the 8 channels. The digital outputs are specially applicable to drive valves, external relays or contactors for higher loads. This extension module is used together with the KNX master module MSA-810. 

AAE-410

 Analog Extension 0-10V

Analog output extension 4 channels 0-10V

It allows to configure valve control, temperature controller, single channel dimming, RGB or RGBW LED control functions on any of the 4 channels. This extension module is used together with the KNX master module MSA-810. 

LAE-802

LEDs Extension

LEDs driver extension 8 channels 2A / 12-24 VDC

It allows to configure single channel dimming, Tunable white, RGB or RGBW LED control functions on any of the 8 channels. This extension module is used together with the KNX master module MSA-810. 

DAE-225

Dimming Extension

Dimming extension 2 channels 250W / 230VAC

It allows to configure dimming functions on any of the 2 channels. Both channels can be used in parallel to drive a single load of 500W. Each channel has two screw terminals to facilitate the connection of multiple wires. This extension module is used together with the KNX master module MSA-810.

Picture 2

Insertion bridges

Using the bridging bars 10mm and 15mm for phase distribution greatly simplify the wiring

User manual & ETS Database

Version : 1.00

 

WHERE TO BUY ?

Visit our web shop !

 Customer feedback

There are no reviews yet. Be the first one to write one.

 Give us your feedback !